Skip to content

boards/stm32f2: migrate to new pinmap #18796

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Draft
raiden00pl wants to merge 1 commit into
base: master
Choose a base branch
from
+219 −84
Draft

boards/stm32f2: migrate to new pinmap #18796

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
1 change: 1 addition & 0 deletions boards/arm/stm32/emw3162/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -7,6 +7,7 @@
#
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="emw3162"
CONFIG_ARCH_BOARD_EMW3162=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/emw3162/configs/wlan/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,6 +10,7 @@
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="emw3162"
CONFIG_ARCH_BOARD_EMW3162=y
Expand Down
17 changes: 15 additions & 2 deletions boards/arm/stm32/emw3162/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -153,10 +153,23 @@
/* UART1 */

#ifdef CONFIG_STM32_USART1
# define GPIO_USART1_RX GPIO_USART1_RX_1
# define GPIO_USART1_TX GPIO_USART1_TX_1
# define GPIO_USART1_RX (GPIO_USART1_RX_1|GPIO_SPEED_100MHz)
# define GPIO_USART1_TX (GPIO_USART1_TX_1|GPIO_SPEED_100MHz)
#endif

/* MCO1 */

#define GPIO_MCO1 (GPIO_MCO1_0|GPIO_SPEED_100MHz)

/* SDIO */

#define GPIO_SDIO_CK (GPIO_SDIO_CK_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_CMD (GPIO_SDIO_CMD_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D0 (GPIO_SDIO_D0_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D1 (GPIO_SDIO_D1_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D2 (GPIO_SDIO_D2_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D3 (GPIO_SDIO_D3_0|GPIO_SPEED_50MHz)

/* SDIO definitions *********************************************************/

/* Note that slower clocking is required when DMA is disabled in order
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/nucleo-f207zg/configs/adc/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ADC=y
CONFIG_ADC_FIFOSIZE=4
CONFIG_ANALOG=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/nucleo-f207zg/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="nucleo-f207zg"
CONFIG_ARCH_BOARD_NUCLEO_F207ZG=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/nucleo-f207zg/configs/pwm/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="nucleo-f207zg"
CONFIG_ARCH_BOARD_NUCLEO_F207ZG=y
Expand Down
16 changes: 8 additions & 8 deletions boards/arm/stm32/nucleo-f207zg/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -186,19 +186,19 @@

/* USART3 (Nucleo Virtual Console) */

#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_USART3_RX (GPIO_USART3_RX_3|GPIO_SPEED_100MHz) /* PD9 */
#define GPIO_USART3_TX (GPIO_USART3_TX_3|GPIO_SPEED_100MHz) /* PD8 */

/* PWM configuration ********************************************************/

/* TIM1 PWM */

#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2 /* PE9 */
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1N_3 /* PE8 */
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2 /* PE11 */
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2N_3 /* PE10 */
#define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_2 /* PE13 */
#define GPIO_TIM1_CH3NOUT GPIO_TIM1_CH3N_3 /* PE12 */
#define GPIO_TIM1_CH1OUT (GPIO_TIM1_CH1OUT_2|GPIO_SPEED_50MHz) /* PE9 */
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1N_3 /* PE8 */
#define GPIO_TIM1_CH2OUT (GPIO_TIM1_CH2OUT_2|GPIO_SPEED_50MHz) /* PE11 */
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2N_3 /* PE10 */
#define GPIO_TIM1_CH3OUT (GPIO_TIM1_CH3OUT_2|GPIO_SPEED_50MHz) /* PE13 */
#define GPIO_TIM1_CH3NOUT GPIO_TIM1_CH3N_3 /* PE12 */

/* DMA channels *************************************************************/

Expand Down
18 changes: 9 additions & 9 deletions boards/arm/stm32/nucleo-f207zg/src/stm32_adc.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -93,9 +93,9 @@ static const uint8_t g_chanlist1[3] =

static const uint32_t g_pinlist1[3] =
{
GPIO_ADC1_IN3, /* PA3/A0 */
GPIO_ADC1_IN10, /* PC0/A1 */
GPIO_ADC1_IN13, /* PC3/A2 */
GPIO_ADC1_IN3_0, /* PA3/A0 */
GPIO_ADC1_IN10_0, /* PC0/A1 */
GPIO_ADC1_IN13_0, /* PC3/A2 */
};

#elif DEV1_PORT == 3
Expand All @@ -115,9 +115,9 @@ static const uint8_t g_chanlist1[3] =

static const uint32_t g_pinlist1[3] =
{
GPIO_ADC3_IN9, /* PF3/A3 */
GPIO_ADC3_IN15, /* PF5/A4 */
GPIO_ADC3_IN8, /* PF10/A5 */
GPIO_ADC3_IN9_0, /* PF3/A3 */
GPIO_ADC3_IN15_0, /* PF5/A4 */
GPIO_ADC3_IN8_0, /* PF10/A5 */
};

#endif /* DEV1_PORT == 1 */
Expand All @@ -143,9 +143,9 @@ static const uint8_t g_chanlist2[3] =

static const uint32_t g_pinlist2[3] =
{
GPIO_ADC3_IN9, /* PF3/A3 */
GPIO_ADC3_IN15, /* PF5/A4 */
GPIO_ADC3_IN8, /* PF10/A5 */
GPIO_ADC3_IN9_0, /* PF3/A3 */
GPIO_ADC3_IN15_0, /* PF5/A4 */
GPIO_ADC3_IN8_0, /* PF10/A5 */
};

#endif /* DEV2_PORT == 3 */
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/olimex-stm32-p207/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -7,6 +7,7 @@
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ADC=y
CONFIG_ANALOG=y
CONFIG_ARCH="arm"
Expand Down
44 changes: 25 additions & 19 deletions boards/arm/stm32/olimex-stm32-p207/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -187,14 +187,14 @@
/* Alternate function pin selections ****************************************/

/* USART3: */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */
#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */
#define GPIO_USART3_RX (GPIO_USART3_RX_3|GPIO_SPEED_100MHz) /* PD9 */
#define GPIO_USART3_TX (GPIO_USART3_TX_3|GPIO_SPEED_100MHz) /* PD8 */
#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */
#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */

/* CAN: */
#define GPIO_CAN1_RX GPIO_CAN1_RX_2 /* PB8 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_2 /* PB9 */
#define GPIO_CAN1_RX (GPIO_CAN1_RX_2|GPIO_SPEED_50MHz) /* PB8 */
#define GPIO_CAN1_TX (GPIO_CAN1_TX_2|GPIO_SPEED_50MHz) /* PB9 */

/* Ethernet: */

Expand All @@ -218,18 +218,24 @@
* - PG14 is ETH_MII_TXD1/ETH_RMII_TXD1
*/

#define GPIO_ETH_PPS_OUT GPIO_ETH_PPS_OUT_1
#define GPIO_ETH_MII_CRS GPIO_ETH_MII_CRS_1
#define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_1
#define GPIO_ETH_MII_RX_ER GPIO_ETH_MII_RX_ER_1
#define GPIO_ETH_MII_RXD2 GPIO_ETH_MII_RXD2_1
#define GPIO_ETH_MII_RXD3 GPIO_ETH_MII_RXD3_1
#define GPIO_ETH_MII_TXD3 GPIO_ETH_MII_TXD3_1
#define GPIO_ETH_MII_TX_EN GPIO_ETH_MII_TX_EN_2
#define GPIO_ETH_MII_TXD0 GPIO_ETH_MII_TXD0_2
#define GPIO_ETH_MII_TXD1 GPIO_ETH_MII_TXD1_2
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_1
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
#define GPIO_ETH_MDC (GPIO_ETH_MDC_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_MDIO (GPIO_ETH_MDIO_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_CRS_DV (GPIO_ETH_RMII_CRS_DV_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_REF_CLK (GPIO_ETH_RMII_REF_CLK_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_RXD0 (GPIO_ETH_RMII_RXD0_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_RXD1 (GPIO_ETH_RMII_RXD1_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_PPS_OUT (GPIO_ETH_PPS_OUT_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_CRS (GPIO_ETH_MII_CRS_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_COL (GPIO_ETH_MII_COL_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_RX_ER (GPIO_ETH_MII_RX_ER_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_RXD2 (GPIO_ETH_MII_RXD2_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_RXD3 (GPIO_ETH_MII_RXD3_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_TXD3 (GPIO_ETH_MII_TXD3_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_TX_EN (GPIO_ETH_MII_TX_EN_2|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_TXD0 (GPIO_ETH_MII_TXD0_2|GPIO_SPEED_100MHz)
#define GPIO_ETH_MII_TXD1 (GPIO_ETH_MII_TXD1_2|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_TX_EN (GPIO_ETH_RMII_TX_EN_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_TXD0 (GPIO_ETH_RMII_TXD0_2|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_TXD1 (GPIO_ETH_RMII_TXD1_2|GPIO_SPEED_100MHz)

#endif /* __BOARDS_ARM_STM32_OLIMEX_STM32_P207_INCLUDE_BOARD_H */
2 changes: 1 addition & 1 deletion boards/arm/stm32/olimex-stm32-p207/src/stm32_adc.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -88,7 +88,7 @@ static const uint8_t g_chanlist[ADC1_NCHANNELS] =

static const uint32_t g_pinlist[ADC1_NCHANNELS] =
{
GPIO_ADC1_IN10
GPIO_ADC1_IN10_0
};
#endif

Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/photon/configs/adb/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_ARCH_LEDS is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ADBD_AUTHENTICATION=y
CONFIG_ADBD_AUTH_PUBKEY=y
CONFIG_ADBD_BOARD_INIT=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/photon/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_ARCH_LEDS is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="photon"
CONFIG_ARCH_BOARD_PHOTON=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/photon/configs/rgbled/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="photon"
CONFIG_ARCH_BOARD_PHOTON=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/photon/configs/usbnsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="photon"
CONFIG_ARCH_BOARD_PHOTON=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/photon/configs/wlan-perf/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -11,6 +11,7 @@
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="photon"
CONFIG_ARCH_BOARD_PHOTON=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/photon/configs/wlan/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -11,6 +11,7 @@
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="photon"
CONFIG_ARCH_BOARD_PHOTON=y
Expand Down
45 changes: 34 additions & 11 deletions boards/arm/stm32/photon/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -195,9 +195,9 @@

/* TIM */

#define GPIO_TIM2_CH2OUT GPIO_TIM2_CH2OUT_1
#define GPIO_TIM2_CH3OUT GPIO_TIM2_CH3OUT_1
#define GPIO_TIM2_CH4OUT GPIO_TIM2_CH4OUT_1
#define GPIO_TIM2_CH2OUT (GPIO_TIM2_CH2OUT_1|GPIO_SPEED_50MHz)
#define GPIO_TIM2_CH3OUT (GPIO_TIM2_CH3OUT_1|GPIO_SPEED_50MHz)
#define GPIO_TIM2_CH4OUT (GPIO_TIM2_CH4OUT_1|GPIO_SPEED_50MHz)

/* RGB LED
*
Expand All @@ -224,21 +224,44 @@
/* UART1 */

#ifdef CONFIG_STM32_USART1
# define GPIO_USART1_RX GPIO_USART1_RX_1
# define GPIO_USART1_TX GPIO_USART1_TX_1
# define GPIO_USART1_RX (GPIO_USART1_RX_1|GPIO_SPEED_100MHz)
# define GPIO_USART1_TX (GPIO_USART1_TX_1|GPIO_SPEED_100MHz)
#endif

/* SPI1 */

#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /* PA7 */
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /* PA5 */
#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz) /* PA6 */
#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz) /* PA7 */
#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz) /* PA5 */

/* SPI3 */

#define GPIO_SPI3_MISO GPIO_SPI3_MISO_1 /* PB4 */
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_1 /* PB5 */
#define GPIO_SPI3_SCK GPIO_SPI3_SCK_1 /* PB3 */
#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_1|GPIO_SPEED_50MHz) /* PB4 */
#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_1|GPIO_SPEED_50MHz) /* PB5 */
#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_1|GPIO_SPEED_50MHz) /* PB3 */

/* SDIO */

#define GPIO_SDIO_CK (GPIO_SDIO_CK_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_CMD (GPIO_SDIO_CMD_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D0 (GPIO_SDIO_D0_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D1 (GPIO_SDIO_D1_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D2 (GPIO_SDIO_D2_0|GPIO_SPEED_50MHz)
#define GPIO_SDIO_D3 (GPIO_SDIO_D3_0|GPIO_SPEED_50MHz)

/* OTG FS */

#define GPIO_OTGFS_DM (GPIO_OTGFS_DM_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_DP (GPIO_OTGFS_DP_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_ID (GPIO_OTGFS_ID_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_SOF (GPIO_OTGFS_SOF_0|GPIO_SPEED_100MHz)

/* OTG HS */

#define GPIO_OTGHS_DM (GPIO_OTGHS_DM_0|GPIO_SPEED_100MHz)
#define GPIO_OTGHS_DP (GPIO_OTGHS_DP_0|GPIO_SPEED_100MHz)
#define GPIO_OTGHS_ID GPIO_OTGHS_ID_0
#define GPIO_OTGHS_SOF GPIO_OTGHS_SOF_0

/* SDIO definitions *********************************************************/

Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/stm3220g-eval/configs/dhcpd/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -6,6 +6,7 @@
# modifications.
#
# CONFIG_NETUTILS_DHCPD_IGNOREBROADCAST is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/stm3220g-eval/configs/nettest/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/stm3220g-eval/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/stm3220g-eval/configs/nsh2/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -11,6 +11,7 @@
# CONFIG_NSH_CONSOLE is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/stm3220g-eval/configs/nxwm/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,7 @@
# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
# CONFIG_NX_DISABLE_16BPP is not set
# CONFIG_NX_PACKEDMSFIRST is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/stm3220g-eval/configs/telnetd/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
Expand Down
Loading
Loading